Full Product Manual

Humidex

Before mounting the unit’s back plate to the wall,

attach the flex pipe to the collar on the back of the

unit and insert the other end of the flex pipe inside

the hole in the wall.(A 24” cable tie or a few small

9/16” screws can be used to affix the flex to the

collar)

NOTE: For instructions on permanently

connected model (APTHC), please see Page 10 for

Wiring Instructions. Please note that this model

requires a qualified person for installation.

Now fasten the unit to the wall using the 4 x 2”

screws provided.

Replace the front of the unit using the 4 screw caps

with the 4 original screws.