09.
Introduction The Humboldt Automatic Marshall Compaction Machine is designed to provide a stable and rigid mechanism for producing 4" or 6" diameter asphalt pills used in Marshall tests. The heavy-duty design stands up well to the constant jarring caused by the compaction process. The H-1364R and H-1366R feature a rotating mold mechanism and a hammer with a beveled foot, which together produce a kneading action when producing test pills.
General Information Inspection: Your Marshall Automatic Compaction Machine was thoroughly inspected before it was shipped and should be ready to operate as soon as you have completed the set-up procedure. Notify Humboldt Mfg. Co. or your local agent and file a claim with any carriers involved if you find any damage to the machine. Physical Specification: Shipping weight : Overall height : Width & Depth dimension: Free fall of hammer: 400 lbs.
Operation Test Specimens Prepare at least three specimens following procedures outlined in ASTM D1559, D5581, D6926, D6927 and AASHTO T245. Thoroughly clean the specimen mold, and face of the compaction hammer, heat them according to specification, and introduce the mixture as explained in the standard. Replace the collar, place the mold assembly on the compaction pedestal in the mold holder, and preset the specified number of blows (to each side of the specimen) using the H-1334 counter’s preset switch.
Replacement Parts for Heavy-Duty, Automatic Single Compactors Description Model 4" hammer with tapered foot (rotating mold) H-1360A 6" hammer with tapered foot (rotating mold) H-1360B 4" hammer with flat foot (stationary mold) H-1360AF 6" hammer with flat foot (stationary mold) Lift Chain for H-1364, H-1366 Series Replacement pedestal for H-1364 and H-1366 Compactors Replacement Counter and proximity switch for Compactors Replacement Counter and proximity switch for Compactors, 230V H-1360BF H-1360
H-1360A.38 H-1360A.30 H-1360A.31 H-1360A.37L H-1360A.37 H-1360B.30 H-1360A.37R H-1360A.36 H-1360A.32 H-1360A.33.1 H-1360A.33 H-1360A.34 H-1360A.32.2 H-1360A.32.1 H-1360A.35.1 H-1360A.32.3 H-1360A.35 or H-1360AF.35 H-1360B.35 or H-1360BF.35 Description Model Anvil release arm weldment H-1360A.38 Hammer release arm H-1360A.38.1 Anvil, top H-1360A.38.2 Spring H-1338.34 Spring H-1360A.31 1/4" dia. x 1" large roll pin H-1360A.32.2 3/16" dia. x 1-1/2" roll pin H-1360A.32.
Drawing
Warranty Humboldt Mfg. Co. warrants its products to be free from defects in material or workmanship. The exclusive remedy for this warranty is Humboldt Mfg. Co., factory replacement of any part or parts of such product, for the warranty of this product please refer to Humboldt Mfg. Co. catalog on Terms and Conditions of Sale. The purchaser is responsible for the transportation charges. Humboldt Mfg. Co.