Operation Manual

SETTING THE UNVERSAL
REMOTE CONTROL
1. Select the button on the remote
control. The button will blink once.
2. Keep pressing the button for 3 seconds
until the button lights on.
3. Enter the 3-digit code. Every time a
number is entered, the button will blink.
When the third digit is entered, the
button will blink twice.
4. If a valid 3-digit code is entered, the
product will power o.
5. Press the button and the mode
button will blink three times. The setup is
complete.
6. If the product does not power o,
repeat the instruction from 3 to 5.
Remote Control Function List
The keys on the remote control function
as in the list below. Some keys may not
function depending on the product.
Button TV Button TV
STANDBY POWER Exit EXIT
TV + VOLUME UP
STB - VOLUME DOWN
RECORDINGS Home MENU
MUTE MUTE i INFO
TEXT TEXT P ^ PAGE UP

TEXT MIX P v PAGE DOWN

PIP INPUT RED RED

TEXT OFF, GREEN GREEN

PIP OFF YELLOW YELLOW

TEXT EXPAND BLUE BLUE

PIP 1 1
R PIP MOVE 2 2
ll TEXT HOLD 3 3
List 4 4
Search 5 5
TV Guide GUIDE 6 6
OK OK 7 7
UP UP 8 8
TOP TIP
When no code is entered for one
minute, the universal setting mode
will switch to normal mode.
Try several setting codes and select
the code that has the most functions.
OK
TV
35