Operation Manual

1. To avoid damage of the power cord or
plug
a) Do not modify or process the power
cord or plug arbitrarily.
b) Do not bend or twist the power cord.
c) Make sure to disconnect the power cord
holding the plug.
d) Keep heating appliances as far as
possible from the power cord in order to
prevent the cover vinyl from melting.
e) The mains plug, as a disconnection
device, shall remain readily accessible by
the user.
2. To avoid electrical shock
a) Do not open the main body.
b) Do not insert metal or inflammable
objects inside the product.
c) Do not touch the power plug with wet
hands.
d) Disconnect the power cord in case of
lightning.
e) Unplug power cable to install the
antenna cable.
3. To avoid damage of product
Do not use the product when it is out of
order. If you continue to use the product
when defective, serious damage can be
caused. Make sure to contact your local
product distributor if the product is out
of order.
4. To avoid damage of the hard disk drive
a) Do not move the product or turn the
power o suddenly while the hard disk
drive is running.
b) The company shall not be liable for any
corruption of data on the hard disk drive
caused by carelessness or misuse.
WARNING
32