Digital Cable Receiver Digital-tvmottagare The default password is 0000. Standardlösenordet är 0000.
• • • • • • Viaccess is a trademark of France Telecom. CryptoWorks is a trademark of Irdeto Access B.V. Irdeto is a trademark of Irdeto Access B.V. Nagravision is a registered trademark of KUDELSKI S.A. Conax is a trademark of Telenor Conax AS. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Caution Indicates a situation which could damage the equipment or other apparatus. Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation. • • Business users: Contact your supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. Disconnect the product from the mains before you start any maintenance or installation procedures. Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock. The product should not be exposed to liquid of any kind.
Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCART Cable HDMI Cable User’s Manual User’s Manual User’s Manual GB7 Note: • Faults may occur if the remote control is left without battery for a long time. Always keep the battery inserted in the remote control. • Package contents may vary according to area. Remote Control Batteries Please check all package contents before using your product. 1.1 Package Contents This chapter provides detail instructions on the product and its accessories. 1.
2 3 4 5 6 7 8 9 10 User’s Manual GB8 Note: The front of the product is subject to change without notice. 10. SMARTCARD SLOT A slot for a Smartcard 9. RADIO LED Amber light is emitted when the product is in radio mode. 8. TV LED Green light is emitted when the product is in TV mode. 7. STANDBY LED Red light is emitted when the product is in standby mode. 6. GUIDE Displays the programme guide. 5. MENU Displays the main menu. 4. OK Selects a menu or confirms the selected operation.
e GB9 User’s Manual Smartcard 1. Open the right-hand flap on the front panel of the product to expose the card slot. 2. Hold the Smartcard horizontally with the electronic chip (small square-shaped, gold in colour) facing downwards. 3. Insert the Smartcard into the slot. The Smartcard looks similar to a credit card and is inserted into the slot behind the right-hand front flap of the product. A valid Smartcard entitles you to view and listen to all the channels you choose to subscribe to.
2 3 4 5 7 8 User’s Manual GB10 9 10 11 12 12. SPDIF Connects to the audio system using an S/PDIF cable. (digital audio) 11. COMPONENT SELECT Switch for changing video. (default: YPbPr) 10. AUDIO Connects to the TV or VCR using an RCA cable. 9. VIDEO Connects to the TV or VCR using an RCA cable. 8. COMPONENT(YPbPr) Connects to the TV or VCR using a component cable. 6 Note: The rear panel of the product is subject to change without notice. 7. USB Connects to the USB memory or external HDD.
. WIDE Sets the display format. GB11 User’s Manual 11. TEXT Switches between the teletext and TV modes. 10. i (INFORMATION) Displays the channel and programme information. 9. MENU Displays the main menu. 8. P-/P+ or PAGE /PAGE Changes the channel or page. 7. COLOUR BUTTONS(R/G/Y/B) Select the colour keys for interactive applications. 6. ARROW BUTTONS Navigates through the menu options. 5. EXIT Exits all On-Screen Display (OSD) screens. 4.
User’s Manual GB12 22 21 20 19 18 17 16 15 14 13 22. V-FORMAT Changes the resolution of video. 21. SLEEP Sets the sleep time. 20. AUDIO Displays the audio list. 19. SUBTITLE Displays the subtitle language list. 18. MUTE Mutes or unmutes the audio temporarily. 17. V-/V+ Adjusts the audio volume. 16. OK Selects a menu or confirms the selected operation. 15. BACK Closes and returns to the previous menu and screen. 14. GUIDE Displays the programme guide. 13.
User’s Manual GB13 1. Press down the top of the battery cover and slide the cover off. 2. Insert the new batteries. Make sure the plus (+) ends meet the plus markings on the battery case. 3. Slide the cover back into place. 1.6 Remote Control Batteries 1.
User’s Manual GB14 Cable Outlet RF Cable 1. Connect your CATV line to the CABLE IN. 2. Connect the product and TV using an HDMI cable. HDMI HDMI Cable The HDMI connection is recommended for Digital TV. In case the TV has an HDMI input connector, a special all-digital interface that provides the highest picture quality, connect the product and the TV using an HDMI cable as follows. 2.
Cable Outlet RF Cable HDMI Cable User’s Manual GB15 1. Connect your CATV line to the CABLE IN. 2. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI to DVI converter. 3. Connect the DVI converter to the TV. 4. Connect the product and the Dolby Digital decoder using an S/PDIF cable. 1. When equipped with an A/V receiver The DVI connection using an HDMI to DVI converter is recommended for Digital TV.
User’s Manual GB16 Cable Outlet RF Cable HDMI Cable Caution: DO NOT CONNECT TO HEAD PHONE CONNECTOR ON TV! Note: You can also connect the product to the TV using the 3.5 Stereo Jack Cable to 2 RCA Y Cable. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using an RCA cable. 3. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI to DVI converter. 4. Connect the DVI converter to the TV.
Cable Outlet RF Cable COMPONENT IN COMPONENT Cable L AUDIO R RCA Cable S/PDIF S/PDIF Cable Note: The Component Select switch should be on YPbPr when using the component cable. You can either: 3. 1) Connect the product and the TV using an RCA cable (Audio L/R). 2) Connect the product and the Dolby Digital decoder using an S/PDIF cable. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using a component cable.
User’s Manual GB18 Cable Outlet RF Cable TV SCART SCART Cable VCR SCART SCART Cable Note: The Component Select switch should be on RGB when using the SCART cable. 1. Connect your CATV line to the CABLE IN. 2. Connect the product and the TV using a SCART cable. 3. Connect the product and the VCR using a SCART cable. A SCART cable connection is recommended for analogue TV or VCR. Connect the product and the TV using a SCART cable as follows. 2.4 Using SCART Cable 2.
User’s Manual GB19 1. Connect the power cord of the product to a wall outlet. 2. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product. 2.5 Powering On 2.
User’s Manual GB20 1. Enter Frequency/ Symbol Rate/ Network ID using the NUMERIC (0-9) buttons. 2. Select Search and press the OK button. 3. Please wait for finishing the channel search. If you want to stop the channel search, press the OK button. 4. Select Save and press the OK button to go to the next step. Search Channels will activate and the result will appear. 3.2 Search Channels Select the appropriate language from the list. Press the OK button to save.
Select Finish and press the OK button to complete the installation wizard. After all setting is complete, you can view the result screen. 3.4 Result Select Next and press the OK button. Select the value for Screen Ratio, Display Format and Resolution. Display enables you to set the screen ratio, display format and resolution of the screen. 3.3 Display 3.
GB19 GB20 Is the product in operation mode (not Standby mode)? Have you performed channel search in the installation wizard? Done? User’s Manual GB22 Note: If you exit the installation wizard without fully completing the channel searching procedure, you may not have all of the channels available. In this case, you can use the installation menu to search for more channels.
You can set the resolution of the screen. Press the V-FORMAT button while watching a programme. The current resolution will be displayed. Each time you press the V-FORMAT button, the resolution changes in the following sequence: 576i 576p 720p 1080i Original 4.3 Resolution Note: The mute function remains set while you switch channels. You can adjust the audio volume. Press the V-/V+ button to adjust the audio volume. Press the MUTE button to stop the audio temporarily. 4.
User’s Manual GB24 Note: If the programme is broadcast in Dolby Digital, you cannot set the audio direction. 1. Press the AUDIO button. 2. Select the audio language you prefer. 3. Select audio direction (left, right, stereo) using the / button. 4. Press the EXIT button to close. You can select the language you prefer in Audio if the current programme is available in multiple audio languages. 4.6 Audio Note: For more information about display format, refer to 7.4.7 Display Format.
Note: You can also select teletext using SUBTITLE button. 1. Press the TEXT button. 2. To display the teletext menu, press the MENU button in teletext mode. 3. Select the teletext function you want and press the OK button. To view the teletext page, use the NUMERIC(0-9) buttons. All teletext supporting channels have the teletext icon on the i-plate. 4.8 TEXT Note: When there is no subtitle available, Off does not appear. 1. Press the SUBTITLE button. 2.
2 4 6 Displays the resolution of the current programme. 1080i User’s Manual Displayed only when the programme is broadcast in Dolby Digital. Displayed the screen ratio of the current programme. 4:3 Displayed only when subtitle information is available. Displayed only when there is any teletext information. Displayed only when the channel is a scrambled channel. Displayed only when the channel provides HD programmes. Digital 7 5 Represents parental level.
Current time & date Programme broadcasting time and progress bar: Displays programme playing time and progress bar. Group name: Displays the group the channel belongs to. Previous/Next programme information: Displayed if previous/next programme information is provided. Press the / button to display previous/next programme information. GB27 User’s Manual Note: If the detailed programme information is over one page, use the / button to move to the previous or next page.
The list of the favourite channels in five groups. The list of all HD channels. Most Viewed: The list of the most viewed channels. Recently Viewed: The list of the recently viewed channels. Favourite (GREEN) HD (YELLOW) History (BLUE) User’s Manual GB28 Note: You can switch between TV and radio by simply pressing the TV/RADIO button. 1. Press the OK button while watching a programme to display the channel list. 2. Press the RED button while the channel list is displayed. 3.
1. Press the MENU button. 2. To display the icon, enable Show Icon using the OK button. 3. To display the channel number, enable Show Channel Number using the OK button. 4. To close the channel list automatically by pressing the OK button, enable Close Automatically using the OK button. 5. To change the list type, select List Type and select among Simple, One Column and Two Column using the / button. 2. Configuration 1. Select a channel and press the OPT+ button. 2.
User’s Manual GB30 1. Press the OK button while watching a programme. 2. Press the YELLOW button to display the HD list. HD List is the list of HD channels. 5.3 HD List 1. Press the OK button while watching a programme. 2. Press the GREEN button to display the list of favourite groups. 3. Press the GREEN button again and select a sub group using the / button. Favourite List is the list of the favourite channels you can select yourself from the entire channel list.
1. Press the OK button while watching a programme. 2. Press the BLUE button to display the history list. 3. Press the BLUE button again and select Most Viewed or Recently Viewed using the / button. History List is the list of the most or recently viewed channels. 5.4 History List 5.
User’s Manual GB32 Note: • Press the i button to view the programme information. • Press the TV/RADIO button to switch to TV or radio. 1. Press the GUIDE button. 2. Press the RED button. 3. Move to the previous/next programme within the same channel using the / button. 4. Move to another channel using the / button. If the contents are more than one page, use the P-/P+ button to skip to the next page. Enter the number of the channel you wish to move using the NUMERIC(0-9) buttons. 5.
Note: Press the BACK button to sort the list in time or alphabetical order. 1. Press the GUIDE button. 2. Press the YELLOW button to display the schedule of reservations. 3. Select a reservation and press the OPT+ button to delete the reservation. User’s Manual GB33 Schedule displays the list of the programmes reserved. You can modify, delete or make new reservations. 6.3 Schedule 1. Press the GUIDE button. 2. Press the GREEN button. 3. You can view the programme information for approximately a week.
User’s Manual GB34 Note: • Reservations for deleted channels or past programmes are automatically deleted. • In case the channel number has changed, reservation has to be done again. 1. Select a blank space and press the OK button. 2. The reservation popup will appear. Enter the channel number, date, start/end time and repeat frequency and then press the OK button. 2. New Reservation 1. Select a reservation you want to edit and press the OK button. The reservation popup will appear. 2.
Press the OK button while the cursor is on Keyword. A keyboard will appear. Enter the keyword. Select Language and choose the language of the keyword. Select SMS to switch to SMS keyboard. Press the YELLOW button to complete. 1. Press the OK button while the cursor is on Time & Day. 2. The time & day popup will appear. Select the time and day using the OK or / button. 3. Select OK and press the OK button. 3. Search by Time and Day 1. Press the OK button while the cursor is on Genre. 2.
The default password is 0000. User’s Manual GB36 Note: You must enter your password to watch programmes blocked by the age restriction. 1. Select Age Limit and press the OK button. 2. Select the age limit you wish to set. Age Limit enables you to place certain restrictions on the viewers by setting age limits. 1. Age Limit 1. Press the MENU button. 2. Select Preferences using the / button and press the OK button. 3. Select Parental Control using the / button and press the OK button. 4.
1. Select Menu/Audio/Subtitle Language and press the OK button.. 2. Select the language you want and press the OK button. GB37 User’s Manual Menu/Audio/Subtitle Language allows you to choose from the given language options and set the language. 1. Menu/Audio/Subtitle Language 1. Press the MENU button. 2. Select Preferences using the / button and press the OK button. 3. Select Language Setting using the / button and press the OK button.
Subtitles are displayed only when you press the SUBTITLE button and set subtitle. Manual Uses the fixed subtitle font as in TEXT. Fixed User’s Manual GB38 Uses the horizontally variable subtitle font of the on-screen display. Variable 1. Select Subtitle Font. 2. Select Variable or Fixed using the OK or / button. Subtitle Font enables you to select the font of the subtitle. 3. Subtitle Font Subtitles are displayed automatically in the predefined subtitle language. Auto 1.
GB39 User’s Manual 1. Select System Update Time and press the button. 2. Enter the system update time using the NUMERIC(0~9) buttons or select Disable using the / button. You can set the time you want to update system. 4. System Update Time 1. Select Power OFF and press the button. 2. Enter the powering off time using the NUMERIC(0-9) buttons or select Disable using the / button. You can select the time the product turns off automatically. 3. Power OFF 1.
User’s Manual GB40 1. Select Audio Output. 2. Select Stereo or Mono using the OK or / button. You can select the audio output option. 3. Audio Output 1. Select VCR SCART. 2. Select CVBS or S-Video using the OK or / button. You can select the VCR SCART output option. 2. VCR SCART Note: You can select RGB only when the Component Select switch at the rear is on RGB. 1. Select TV SCART and press the OK button. 2. Select among CVBS, S-Video and RGB and press the OK button.
1. Select Letter and Pillar Box Colour and press the OK button. 2. Select Black or Gray using the OK or / button. You can set the colour for margin space according to the display format. 8. Letter and Pillar Box Colour User’s Manual GB41 1. Select Display Format and press the OK button. 2. When choosing 4:3 as screen ratio, select among Auto, Letterbox and Pan & Scan and press the OK button. 3. When choosing 16:9 as screen ratio, select among Auto, Pillar Box and Zoom and press the OK button.
The bigger the number, the more transparent the screen. 25%, 50%, 75% User’s Manual GB42 1. Select Power Saving in Standby and press the OK button. 2. Select On or Off using the OK or / button. You can switch the product to power saving mode in standby. 3. Power Saving in Standby Fully opaque screen Disable 1. Select OSD Transparency and press the OK button. 2. Select among Disable, 25%, 50% and 75% and press the OK button. You can set the transparency of the On-Screen Display. 2.
The default password is 0000. Note: • When all selected channels are locked, Lock is switched into Unlock. When you press Unlock, the locked channel is switched into an unlocked channel. • To watch locked channels, you must enter the password using the NUMERIC(0-9) buttons. 1. Select the channel you want to lock and press the OK button. 2. Press the RED button. 1. Locking/Unlocking Channels 1. Press the MENU button. 2. Select Edit Channels using the / button and press the OK button. 3.
User’s Manual GB44 1. Press the GREEN button to display the list of groups. 2. Select the favourite group you want and press the OK button. 2. Selecting Favourite Groups Note: When the cursor is on the left column, the red button is marked Add; when the cursor moves to the right column, it becomes Remove. 1. Select the channels you want to add to the favourite channel list and press the OK button. 2. Press the RED button to add the channels to the favourite list you have chosen. 3.
Select the favourite group you want to rename and press the OK button. Press the BLUE button. Select Rename Group and press the OK button. A keyboard will appear. Enter the name of the favourite group using the keyboard. Press the YELLOW button to complete. 1. Press the MENU button. 2. Select Edit Channels using the / button and press the OK button. 3. Select Display History List using the / button and press the OK button.
The default password is 0000. User’s Manual GB46 1. Press the MENU button. 2. Select Installation using the / button and press the OK button. 3. Select Channel Search using the / button and press the OK button. 4. Select Frequency and enter the frequency using the NUMERIC(0~9) buttons. 5. Select Symbol Rate and press the OK and / button. If the required value is not available, select User Define and enter the symbol rate directly. 6.
Press the MENU button. Select Installation using the / button and press the OK button. Select Software Update using the / button and press the OK button. When new software is detected, you can choose to download the software immediately or save for later. User’s Manual GB47 Note: For detailed information about the installation wizard, refer to Chapter 3. Installation Wizard. 1. Press the MENU button. 2. Select Installation using the / button and press the OK button. 3.
User’s Manual GB48 1. Press the MENU button. 2. Select System using the / button and press the OK button. 3. Select Signal Detection and press the OK button. 4. The information of the tuner will be displayed. You can view the antenna, transponder information, signal strength and quality of the tuner. 10.2 Signal Detection 1. Press the MENU button. 2. Select System using the / button and press the OK button. 3. Select Status and press the OK button. 4.
1. Select Change CA PIN and press the OK button. 2. A popup will appear. Enter the CA PIN in the popup using the NUMERIC(0-9) buttons. 3. Enter the new CA PIN and confirm the new CA PIN to complete. You can change the current CA PIN. 4. Change CA PIN You can view the tokens status. Press the / button to scroll up/down the list. 3. Tokens Status GB49 User’s Manual You can view the status of the reserved events. Press the / button to scroll up/down the list. 2.
User’s Manual GB50 You can view the Smartcard information. 7. About Conax CA You can view the conditional access messages. Press the / button to scroll up/down the list. 6. Messages 1. Select Maturity Rating and press the OK button. 2. Select Change Maturity Rating and select the rating value using the OK or button. You can change the maturity rating setting. 5.
User’s Manual GB51 When new software is detected, you can choose to download the software immediately or save for later. In case there is no software currently available, select Next and press the OK button to proceed to the next step. 1. Software update while watching a programme Note: • It may take 5 ~10 minutes to update software. • Other functions will not activate while software update takes place. • You cannot schedule programmes during software update.
User’s Manual GB52 System Installation Edit Channels Preferences 12.1 Menu Map 12. Appendix Parental Control Language Setting Time Setting A/V Setting Other Settings 1. Status 2. Signal Detection 3. Conditional Access 1. Channel Search 2. Software Update 3. Default Setting 1. Edit Channel List 2. Edit Favourite List 3. Display History List 1. 2. 3. 4. 5.
Check the main power cable and make sure it is plugged into a suitable power outlet. Check that the mains supply is switched on. Connect the power cable to a different power outlet. Make sure that the product is powered on and in operation mode. (Press the STANDBY button) Make sure that the AV cable is firmly connected to the TV. Make sure that the cable is properly connected to the product. Be sure to activate channel search. Check the brightness level of the TV. Check if the channel is currently on air.
User’s Manual GB54 Incorrect card No card inserted. No access The audio is not available. The channel is scrambled or not available. No or bad signal Error message Pull out the Smartcard and reinsert it. Replace the Smartcard. Smartcard is broken. Insert appropriate Smartcard. Wrong Smartcard is inserted. Smartcard is not inserted correctly. Insert Smartcard. Smartcard is not inserted. No authorization. Make sure you are subscribed to the channel. No subscription to this channel.
51 MHz~858MHz -15dBmV~15dBmV DVB-C(16QAM, 32QAM, 64QAM, 128QAM, 256QAM) 1.5~7MS/s Frequency Range Signal Level Demodulation Input Symbol Rate MPEG-2MP@ML, MPEG-2MP@HL, MPEG-4 AVC/H 264 HP@L4 15MB/s Max 4:3, 16:9 1080i, 720p, 576p, 576i MPEG/MusiCam Layer I & II Single channel/Dual channel/Joint stereo/Stereo Profile Level Input Rate Video Format Video Resolution Audio Decoding Audio Mode 128MB 8KB RAM EEPROM USB USB 2.0 Host (5 V 100mA Max.
SMPS Max. 14W Separate internal fuse. The input should be protected against lightning. Type Power Consumption Protection 1.5 Kg 0 ºC to +45 ºC -10 ºC to +70 ºC Weight (Net) Operating Temperature Storage Temperature User’s Manual GB56 280mm×200mm×45mm Size Physical Specification 90-250V a.c., 50/60Hz Input Voltage Power Supply 12.
• • • • • • • • User’s Manual GB57 A credit card sized card that contains updateable chip memory. It is used for accessing Pay TV (encrypted) channel or services when inserted into an appropriate receiver. Smartcard An on-screen graphic menu that displays how strong the digital signal you are receiving is. Signal Strength A standard format for the transfer of digital audio signals.
User’s Manual GB58 Tfn: Öppettider: Språk: Sverige Tel: Orario: Lingua: Italia Tel: Opening Hours: E-mail: Website: Language: Australia Tel: Opening Hours: E-mail: Website: Language: UK Tel: Öffnungszeiten: E-mail: Website: Sprache: Deutschland +46 (0)550 85527 Mån-fre 08:00-16:30 Svenska/Engelska 899 100 080 (€1+ VAT/min) Lun.-Ven. 8:00-18:00 Italiano 1800 613 011 Mon- Fri 9:00-17:30 techinfoau@humaxdigital.com www.humaxdigital.
0820 400675 (€0,14/min) Mon-Sun 8:00-23:00 support@humax-digital.de www.humax-digital.de Deutsch/English/Turkish +358 9 56186 130 ma-pe 8:00-16:00 Suomi/Englanti Note: For hardware repair, please visit our website. Tel: Opening Hours: E-mail: Website: Language: Austria Puh: Aukioloajat: Kieli: Suomi 12.
*20000-00064PT* 20000-00097PT ROHS/MANUAL/CXHD5000C/200GBSV(COMHEM)
