Manual

CPU200

Installation

Instructions

Step 2:

Align Mounting Rails of the CPU200 with front edge of Track

and slide unit into Track.

Step 3:

Slide Quick Track Cover into Track.

Step 4:

Use Thumb Screws to secure Quick Track Cover to Track. Your

Quick Track system is now installed.

Removal:

To remove CPU200 from the Track, loosen Thumb Screws,

remove Quick Track Cover, and slide unit off the Track.

Track

Quick Track

Cover

Thumb Screws

CPU200 Track Installation

HSICPU2000909

PAGE 1
CPU200 CPU200 Track Installation Track Quick Track Cover Thumb Screws Step 2: Align Mounting Rails of the CPU200 with front edge of Track and slide unit into Track. Step 3: Slide Quick Track Cover into Track. Step 4: Use Thumb Screws to secure Quick Track Cover to Track. Your Quick Track system is now installed. Removal: To remove CPU200 from the Track, loosen Thumb Screws, remove Quick Track Cover, and slide unit off the Track.
PAGE 2
CPU200 Installation Instructions CPU Installation Step 2: Width Knob Slide Upper Assembly downward until it sits Mounting Rails snugly on top of CPU. Tighten Height Lock. Push Side Bracket inward until it fits tightly Height Lock against CPU. Tighten Width Knob. Upper Assembly Side Bracket Non-Skid Pad Spacer (optional) Base Track Installation Mounting Tape Tabs Step 1: Track Width Knob Height Lock For CPUs 7” – 12” in Height Loosen Width Knob and slide Side Bracket outward.