Owner's manual

ManualsBrandsHumanscale ManualsComputer Accessories5G Keyboard System with Clip Mouse

5G Keyboard System

with Clip Mouse User Instructions

Your 5G Keyboard System slides on

a track. To use your keyboard system,

simply slide it out from under the

desk. To put it away, simply slide your

keyboard system back under the desk.

Keyboard Depth Adjustment

Summary of content (6 pages)

PAGE 1
5G Keyboard System with Clip Mouse User Instructions Keyboard Depth Adjustment Your 5G Keyboard System slides on a track. To use your keyboard system, simply slide it out from under the desk. To put it away, simply slide your keyboard system back under the desk.
PAGE 2
5G Keyboard System with Clip Mouse User Instructions Keyboard Height Adjustment To raise the height of your keyboard system, lift the front edge of the keyboard platform, raise to desired height and release. It will automatically lock in place. To lower, tilt the platform from the front edge, lower to desired position and release. Ergo Tip: Adjust keyboard height to within 1 inch of seated elbow height while maintaining clearance between the bottom of the platform and the thighs.
PAGE 3
5G Keyboard System with Clip Mouse User Instructions Keyboard Angle Adjustment To change the angle of your keyboard platform, locate the adjustment dial and turn to desired angle. Ergo Tip: Set the keyboard angle such that your wrists are straight while your palms are positioned on the palm support. For most users, the ideal angle will be between –5 and –10 degrees.
PAGE 4
5G Keyboard System with Clip Mouse User Instructions Clip Mouse Horizontal Adjustment The Clip Mouse can be moved closer to or further away from you by simply sliding it forward or back. Grasping the unit near the Rail will facilitate the sliding action. The Clip Mouse can also be adjusted laterally by rotating it around its offset pivot point. Ergo Tip: Position the Clip Mouse so that you can easily reach the mouse by simply swinging your forearm from the center of the keyboard.
PAGE 5
G Keyboard System with Clip Mouse User Instructions Clip Mouse Height Adjustment The Clip Mouse can be positioned at one of two heights – either above the keyboard’s numeric keypad or at keyboard height. To adjust the Clip Mouse from the low position to the high position, simply lift the platform and push towards the keyboard until the platform locks into place. To adjust the Clip Mouse from the high position to the low position, pull the platform away from the keyboard.
PAGE 6
5G Keyboard System with Clip Mouse User Instructions Clip Mouse Angle Adjustment If the keyboard platform is set to a tilt, the Clip Mouse platform can be adjusted so that the mousing surface is parallel to the floor. Simply grasp front edge of the Clip Mouse platform and move it up or down to achieve desired angle. Clip Mouse Left/Right Use The Clip Mouse may be used on either the left or right side of the keyboard to accommodate left- or right-handed users, or to periodically alternate the mousing hand.