User's Manual

5.5.4 Auto Scan Mode
Auto scan mode is an automatic camera switching function to all
paired camera units at an interval of 15 seconds. The display
sequence is at numeric order of camera number.
For example : Cam1, Cam3 and Cam4 are paired, the sequence will
be cam1 > cam3 > cam4 and loop. During auto scan mode, VOX
function will be automatically set OFF.
5.5.5 Split Screen Mode
Split screen mode is a function to display 2 camera captured images
simultaneously at the same screen. Camera image will be resized to
~60% from its original size, and part of the image will be overlapped
in order to fit into the screen. The screen at lower left is regarded as
primary screen and overlapped to the secondary screen at the
upper right. Audio signal will be transmitted at primary screen only.
During split screen mode, VOX Function will be automatically set
OFF.
To switch the primary screen to next camera number, press - button.
To switch the secondary screen to next camera number, press +
button. Only paired camera units will be displayed.
PTT(Push-to-talk) function will be applied to primary screen only.
During PTT, secondary screen will be disabled.
19
Secondary
Camera Info
Primary Camera Info.
Battery Capacity
If two camera units are paired in split screen mode, press either
+ or - button will swap the primary and secondary screen.
TipsTips