User's Manual

5.5.2 Camera Pairing
To pair a new camera unit, select a 'Not paired' camera number
from Camera menu, and press 'OK'. Below screen will be shown :
Select 'Pair' function and press 'OK' button. The monitor unit will
start searching the camera unit and a 'Connecting' status will be
displayed.
Power on the camera unit. Press and hold 'P' button of camera
unit will initiate the pairing mode and connecting to the monitor
unit. When pairing process is completed, the description will
display a 'Pairing Success' message.
To stop the pairing process, press exit button once. The
pairing process will be stopped if camera unit cannot be found in
30 seconds.
To view a paired camera, select 'View' function and press 'OK'. To
un-register a paired camera, select 'Delete' function and press
'OK'.
To exit and go back to Camera menu, press button
Lullaby
Stop the Lullaby Playback
Stop
Play Once
Play 30 min
Play 1 hour
Play the Lullaby once
Play the Lullaby for 30 minutes
Play the Lullaby for 1 hour
18
5.5.3 Lullaby Playback
Lullaby volume level can be adjusted at Intercom volume
function as mentioned in section 5.4.6
Tips