User's Manual

09
Mount the camera unit by double-sided tape
pic.6
Black Word
pic.7
1. Clean the mounting surface by alcohol.
2. Remove the cover label from the double-sided tape, and stick it onto
the recess area of camera base plate, as s hown
in pic. 6
3. Remove the cover label from the other side of double-sided
tape, and stick the camera base plate onto the mounting surface.
Press the camera base plate onto the mounting surface for 10
seconds. Wait 24 hours then hook the camera stand onto base plate.
Mount the camera by tripod
1. Remove the camera stand as shown in pic. 7.
2. Fasten the tripod (not included) to the tripod mount at the bottom of
camera unit.