User's Manual

4.2 Powering Camera Unit
08
pic.4
4.3 Mounting Camera unit
The camera unit was designed to
s u p p o r t d i ffere n t m o u n t i n g
mechanism, from simply putting
on a table to mounting on a wall
by screw or double-sided tape.
1. Tighten the provided screw
the
provided screw onto the wall
surface by a screw driver, until
the screw only sticks out by
about 6mm as shown in pic. 5.
2. Remove the base plate from
camera stand, and hook the
camera stand onto the screw.
Mount the camera unit by screw
pic.5
6mm
Plug the A/C adapter into the
wa ll el ectrica l o ut let. Then
attach the cord to the DC Jack as
shown in pic. 4.