Instructions / Assembly

Make the electrical connection from the junction box (not included) to the
fixture. Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Then, connect the positive, negative and ground wires
with the supplied wire nuts. Secure with electrical tape.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 6
STEP 4
Install bulb (not included)
STEP 5
Secure the canopy to the mounting unit with the screw collar ring.
NOTICE: Before use, add silicone glass sealant
between the ceiling and the canopy to completely
cover the gap.
Smooth side of wire from
the fixture identified
with the label "L"
Ground wire from
the Fixture
Ribbed side of wire from
the fixture identified
with the label "N"
Black or Red wire (hot)
from the junction box
White wire (neutral)
from the junction box
Bare or Green ground wire
from the junction box
*Green Ground Screw
*Sealing tape
(not included)