User's Manual

Page 12
cellular phone worldwide must be printed with this identification code, and the IMEI
code for each handset is globally unique without repetition with another.
Enhanced Full Rate Coding EFR 
The handset has the “ Enhanced full rate coding" function, which needs no presetting,
the handset can detect the network system automatically. If this service is provided by
your network, the handset can automatically actuate the function to supply you sound
quality with high fidelity.
6.Basic operation
Switching on
Holding down the on-hook keycan switch your handset on or off.It will automatically
search the network if no crypto guard for the SIM card and the handset.After the handset
has been registered in the network, the network's name displays on the screen. And now
you can dial out or answer a call.
Your handset remains in the searching status if not finding the network system available.
If the screen displays “ Please insert SIM card" after it is on, please switch the phone off
by pressing the on-hook key, and check whether your SIM card is properly installed or
not yet installed.
If a password or PIN code for the handset is required to enter after it is on, please enter
the correct password, and * will be displayed on the screen as the content during the
entry. Then press the left-soft key for confirmation. After unlocked, the handset will
indicate the name of the registered network and the signal intensity.
Please contact your network supplier if you have not yet known the PIN code.
The handset default password is 1234.
Switching off
To turn off the handset, please hold down the on-hook key, the handset is off after the