User's Manual

Page 20
User Profiles
The phone provides profiles of General, Meeting, Outdoor, Indoor and Headset and
default setting has been performed. Among them, the phone will automatically enter into
headset profile after you connect the earphone. For each profile, you can customize the
following options:
【Tone Setup 】
 Incoming Call: Set incoming call ringing tone.
 Alarm: Set alarm clock ringing tone.
 Power On: Set switch-on tone.
 Power Off: Set switch-off tone.
 Message Tone: Set short message prompt tone.
 Keypad Tone : Set key stroke tone.
【Volume】
 Ring tone: Set the volume of ringing tone.
 Key tone: Set the volume of key stroke tone.
【Alert Type】:You can select four prompt tone types of ringing, vibrating only, vibrating
and ringing, vibrating then ringing and light only.
【Ring Type】: You can select ringing tone type as single, repeat or ascending.
【Extra Tone】
 Warning: After this option is selected, there will be a tone once the phone
gives off a warning.
 Error: After this option is selected, the phone will give off error prompt
tone once there is wrong operation.
 Camp on: After this option is selected, the phone will give off prompt
tone after it finds the network.
 Connect: After this option is selected, there will be prompt tone when the
connection for a call is established.