User's Manual

5
Missed call
Call forwarding activated: Your calls will be forwarded
Alarm clock activated
Signal strength indicator
2. Getting started
2.1 Removing the back cover
2.2 Insert the UIM card
The mobile phone can only be used with the UIM card
inserted. Insert the UIM card with the gold plate facing down,
sliding it into the card slot, paying attention to the position of
the slanted angle.
2.3 Install/ Remove the battery
Insert the top of the battery first, matching the gold contacts on
the inside of the battery to those on the phone. Press lightly on
the bottom end of the battery down into the phone until it slips
into place. Place the back cover on the phone and slide it into
place.
Remove the back cover and lift the battery up and away from
the phone.
Note: Please switch off the phone before Installing/removing