User's Manual

11
save position by setting save position.
8.5 Copy/Move
Select Menu/Contact/Copy/Move. You can copy or move all
the records in the UIM or telephone. You can also copy one or
several records in contacts.
8.6 Settings
Select Menu/Contact/ settings for the available options: Save
position, View mode.
Save position: You can set the default storage location
where new contact is stored.
View mode: You may set the view mode: UIM and Phone,
Phone, UIM.
8.7 Speed dial
Select Menu/Contact/Speed dial to set keypad 2 through 9 for
speed dial numbers. If it has not been set, press the left soft
key and select a phone number from Contact. If it has been
set, press the left soft key and the following options appear in
the display: Add, Clear.
Add: assign the speed dial number again
Clear: delete the speed dial number
8.8 Memory status
Select Menu/Contact/Memory status to check the memory of
the contact in the phone memory or UIM card.
9. Messages
In standby mode, press down key to open the message
editing screen. Press up key or press the key
to select
Messages to access the Messages menu from standby mode.
9.1 New message
Select Menu/Messages/New message to access the message
editing screen. Please refer to “Input mode” section for
instruction about message editing.
In the message editing screen, press the left soft key for the
following options: Send, Send to Many, Insert Domain Symbol,
Insert Contact, Templates and Insert Emoticons.
Send: Send a message to one
Send to Many: Send a message to many