User's Manual

interference of ringing tone or vibration.
Call recording / Mic mute
When the phone is in conversation state, “Mute” and “Menu” are displayed at the bottom of the main screen.
Press the left and right-direction key to switch between these two options.
When you select “Mute” and press the key
, you will be able to turn off the mic in order that the other party
cannot hear your voice and you can still hear the other party’s voice (the mic is still on). At this time, “Unmute”
is shown at the bottom of the screen to indicate mute function is turned on. Select “Unmute” and press the key
again to turn off the mute function.
When you select “Menu” and press the key
, you can access the phone’s main menu to perform other
operations.
Recent dialed-out numbers
This handset can store 10 recent dialed-out numbers. On standby screen, press the key to display recent
dialed-out numbers. You can press the up and down-direction key to view the called numbers and press the key
to directly dial the selected number.
Besides, you may access the call record menu to view the recent dialed-out numbers.
Missed call
If there is missed call (s), “N call (s) missed” will be displayed on the main screen. You can access the call
record menu to view the record of the calls missed.
Using the menu
Under standby state, press the left soft key to access the main menu of the phone.
All menus of the phone have the function of text prompt for corresponding function. Each set of menu is further
divided into multi-item sub-menu. Menu functions may let you set, check or change the phone’s various
functional settings to meet your personal requirements. Please refer to the following “Menu option list” for
selection of the functions you require for use.
 Press the up and down-direction key to select from the menu. Press the key
to confirm to enter into
the sub-menu list of the selected menu. Then press up and down-direction key to select and press the key
to confirm or enter into the lower-level menu.
 Press the key
to return to higher-level menu. Press the key to exit the menu directly and
return to the standby screen.
 In editing state, the key
has deleting function. Press it once to delete one character and hold it to
delete all the input characters.
 In options, (on) or (enabled) is to enable corresponding function and (off) or (disabled) is to disable
Page 12