User's Manual

If the dialed number is stored in the phonebook, then the name of the called party will be displayed on the
screen.
To end a call, you can press the key
. After a call is ended, the call timer stops and the text “Call ends” is
displayed on the screen.
Saving a number by dialing
You may save the other party’s number with phonebook, or by dialing under standby state. The number saving
procedure of the former method is described in details in communication phonebook menu. Specific steps for
saving a number by dialing under standby state are as follows:
 Input the other party’s phone number under standby state.
 Press the left and right-direction key to perform function selection. You may save this number as new
(the number is saved in the phone), combine this number (add this number to an existing contact), save
this number in the UIM card, search or pause operation.
Adjusting the volume of earpiece
During a conversation, you may press the up and down-direction key to adjust the volume of earpiece.
Answering a call
 When a call is incoming, the phone will prompt you according to the incoming call prompt mode you
set.
 To answer a call, press the key
to answer the call directly.
 To reject a call, press the key
and the other party will hear a busy tone.
If you have enabled the automatic answer function and the earphone is connected with the phone when a call is
incoming, the phone will answer the call automatically after a certain period of time if you don’t reject the call.
If you have subscribed to the caller number identity service, then during the conversation caller number will be
displayed on the screen. If this number is already saved in the phonebook, then caller’s name will also be
displayed on the screen.
 To end a conversation, press the key
.
Note: If you have subscribed to the following additional services, incoming call may be diverted to the
specified number automatically:
 Divert If Busy

Divert If No Answer

Divert If Unreachable

Divert All Calls
Silent start
When a call is incoming, “Silence” will be displayed at the bottom of the main screen and your phone will
prompt according to incoming call prompt mode. When ringing tone or vibration is enabled and you press OK
key to select silence, the program will turn off the ringing tone or vibration function to protect you against the
Page 11