OT-203C Mobile Phone Contents 1. Your mobile ....................................................................................................... 2 2. Getting started .................................................................................................. 5 3. Basic functions .................................................................................................. 6 4. Messages .........................................................................................................
1. Your mobile 1.1 Basic specifications Item Specifications Size: 108.5mm[L]×45.2mm[W]×14.5mm[Thickness] Mobile Phone Weight: 61g approx.(Including lithium battery） Screen resolution 128×128 Contacts 1000 entries Call Memory 60 entries Message Inbox：1000；Outbox：30；Drafts：30 Rated capacity: 670mAh Nominal voltage: 3.7V Li-ion battery Talk time: 180 to 240 minutes Standby time: 60 – 120 hours (approx.
Left soft key: Enter menu Confirm an option Call key: Answer/Send a call Call Memory (short key press) Navigation keys Upper Key: Key Volume Setting. Lower Key: Shortcut menu left Key: Profiles Right Key: Messages OK Key: TATA Zone Right soft key Contacts In Menu: Back/Clear End key Switch-on/Switch-off End call Back to the idle screen Voicemail (short key press) Lock/Unlock the keypad Change text input method (long key press) Enter the „#‟ symbol.
select a contact‟s phone number. TATA Zone Access TATA Zone Brew Service to download exciting ring tones, wall papers and other applications offered by TATA Indicom Display You can set the wallpaper. Clock, Time, and the time of LCD Backlight. Call manager Access the Call Memory. Organiser You can you can set alarm, scheduler, add new memo and use some little tools. Settings Set the Language, Key guard, Airplane and security modes in your phone 1.4 Screen Icons Network signal strength. No network.
Airplane mode on. Display CDMA 1X 2. Getting started 2.1 Removing the back cover 2.2 Inserting the UIM card The mobile phone can only be used with the UIM card inserted. Press and hold the end key. Insert the UIM card with the metallic contact downwards, sliding it into the slot as shown by the arrow, paying attention to the position of the slanted angle. To remove the UIM card, slide the card out in the direction shown. 2.
Remove the back cover and remove the battery as shown (direction of the arrow). 3. Basic functions 3.1 Switch-on/off When power is sufficient, press and hold the end key to switch on. If you have activated a password or a PIN code, you will be prompted to enter it. Normally the phone is ready for use as soon as you enter the password or the PIN code. For details on the use of the PIN code and password, please refer to Menu> Settings> Security> Card settings.
3.5 Call waiting While a call is in progress, you may hear two beeps indicating another incoming call. When call waiting is enabled, you can put the active call on hold while you answer another call. This service should be provided by your service provider. 1) Press Call key to receive a waiting call during the first call. 2) Press Call key again to switch between two calls. 3.
be displayed on the screen. Note: Check with service provider for availability of this feature. Templates: There are 9 predefined phrases in the Templates. You may edit the templates and add new templates. Drafts: You can save the messages you edit in the drafts. SMS Groups: You could organize the contacts into the SMS Groups, and send a message to the group. 5 Groups can be saved. Erase Msgs: You can delete all stored messages from different folder and make them empty.
Start: start a new game. Game level: Select the levels of the game. Rank: view the former of score. Keys Function OK key Start the game 2/Up key Change shape 4/Left key Left 6/Right key Right 8/Down key Down Left soft key Pause/Replay the game Right soft key Exit the game 5.3 Voice recorder Record New: Record the voice you want. Voice Records: In the recorder list, you can play the recorder, and rename or delete them. 6. Profile Customize the phone's profiles.
Number, Home Number, Other Number, E-mail and Memo. Input the details, press Select key to save the new contact. Find: You can find contact you want you have stored in the Phone and the UIM card. Groups: you can set contacts in some groups. Your phone have supplied twelve groups, you can set ring tone and rename for these groups. Note: The contacts in UIM card just only in [No group] you can not change their group. Speed dial: You can make a call faster by just pressing a corresponding number.
Wallpaper: You can set the picture in idle status your phone has already supplied 4 pictures and you can download from web. And you can select enable or disable to show the banner, you also can change the banner. Clock: You can select type of clock, your selection will be displaying on idle. Time: You can select time format from 12 hr or 24 hr. LCD Backlight: You can set the time of LCD backlight when you haven‟t operated your phone. 10.
Call Forward: You can configure the call forward service which diverts incoming calls to a special number. Call Waiting: You can configure the call waiting services which hold Incoming call that you can answer or not Voice Privacy: Use an encrypted high security line so that people can not eavesdrop on your conversation, or use a standard line. Smart Sound: If you set this function on, it can eliminate the noise around when you answering a call.
Erase to Date: You can select one week or one day to delete the schedule you select. Erase All: You can delete all schedules. Your phone will alert when the schedule time is coming. You can press right soft key to stop it. 11.3 Memo Pad In this function you can add new memo and save it. You can View /Add/Erase/Erase All. 11.4 Tools In this function your phone has supplied 4 little applied tools: Stopwatch, Calculator, Unit Converter, World Clock. 12. Settings 12.
Lock Mode: Keep your phone from unauthorized use. You can select Lock Mode, such as Off, Now, On Power Up. If you select Now the phone will be locked immediately, and if you select On Power Up, the phone will be locked after power on. Change Lock Code: You can change to a new four-digit lock code number. For confirmation, your phone will prompt you to enter the new lock code twice. Reset: Reset all settings to the default options. Reset all items in the phone.
FAQ Item to be checked Poor sound quality Check if the reception signal is strong enough. If you are inside a building, rotate the phone or move close to a window. The other party cannot Make sure the mouthpiece is not blocked. hear you during a call The receiver volume is Check if the receiver volume is set to maximum. low The phone signal is poor Make sure the phone antenna is not damaged. or switches off frequently Check the phone signal strength.
such as pacemakers, hearing aids and other electronic medical devices. Pacemaker manufacturers recommend that mobile phones are kept at least 15 cm away from pacemakers to prevent the phone interference. When using the phone, you should hold it against the ear on the opposite side to the device, to reduce interference. Mobile phones should be forbidden inside an operating theatre, Intensive Care Unit (ICU) or Cardiac Care Unit (CCU).
such as an electromagnetic pot or a microwave oven, to avoid causing the phone to malfunction, catch fire or explode. Do not subject the phone, battery or charger to heavy impact or vibration to avoid battery leakage, phone malfunction, overheating, fire or explosion Do not place sharp metallic items such as needles, near the receiver because the receiver will attract them and you may be injured when using the phone.
Switch off the phone before cleaning and maintenance. The charger should be unplugged from the power socket and the phone and charger disconnected to prevent any electric shock or short circuiting of the battery or charger. Do not wipe the phone or charger using chemical substance (alcohol benzene), chemical agents or abrasive cleaning agents to avoid damaging its parts or causing a malfunction. You may clean with a slightly damp anti-static soft cloth.
other liquids. Infiltration of liquid may cause electric leakage or other malfunction to the charger.If the battery leaks, emits smoke or a strange odour, cease use immediately and move it far away from naked flames or people to avoid a fire or injury from explosion. Do not charge the battery in a dusty or damp environment and keep the cable away from heated objects. The battery is not fully charged when leaving the factory. Therefore, you should charge the battery for two hours before use.
TCT Mobile Limited reserves the right to Alter material or technical specification without Prior notice. FCC statement : Section 15.105 (b) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
