Instruction Manual

.Note: To achieve fast charge function,
only use the provided cable and UL listed
AC adapter.
2.Phone Stand:
.Remove phone stand(3) from back of
charging pad that magnetically connected.
.Insert flat side of the stand through the slot
of the charging pad.
SAFETY PRECAUTIONS:
Read all the instructions before using the
product.
1.Do not use on an aircraft or in a hospital.
2.To reduce the risk of injury, close
supervision is necessary when the product
is used near children.
3.Do not expose the device to any moisture.
4.Do not use the device in excess of its
output rating. Overloaded outputs above
rating may result in a risk of fire or injury.
5.Do not use the device if damaged or
modified. Damaged or modified device may
exhibit unpredictable behavior resulting in
fire, explosion or risk of injury.
6.Do not disassemble the device. Take it to
a qualified service person when service
or repair is required. Incorrect reassembly
may result in a risk of fire or injury.
7.Do not expose the device to fire or
excessive temperature. Exposure to
extreme heat may cause explosion.
8.Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
9.This device is not a toy.
10.Do not overcharge Phone. Unit may get
hot with excessive use. Remove Phone
when it is fully charged. Never charge for
more than 7 hours at a time.
***KEEP OUT OF REACH OF CHILDREN***
DEVICES:
Compatible with WPC Qi V1.2.4 latest standard,
support A11 or A11a coil, support 5W, Apple 7.5W,
Samsung 10W charging.