User's Manual

4
Instructions of Press Button Functions
（1）
Power key
The power key is at the bottom of this robot，“ ” Power on key，“ ” Power off key。Before
using this product, make sure that the power switch is on.
（2） Automatic cleaning key
At first, make sure that the power switch at the bottom of this product is on, and then click
“ ” key，the zigzag cleaning mode starts automatically；During the cleaning process，click
“ ” key，the product pauses.
（ 3 ）
Recharging/APP Connection Key
Click “ ” key，Recharging mode starts.Turn on the power switch and press the recharge key
for 3 seconds, the APP connection mode starts. Please refer to app operation instruction for
specific distribution network mode.
Indicator Status Definition and Comparison Table
Product Status
Indicator Status
Power on
Red and green indicators flash for 3 seconds
Standby
Red and green indicators are on continuously,then
the sleeping mode starts after 5 minutes
Automatic Cleaning Mode
The green indicator flashes and the red indicator
goes out
Spot cleaning mode
The red and green indicator flash alternately
Recharging Status
Double flashing both red and green indicators
Charging Status
The red indicator flashes, the green indicator goes
out
Full charging Status
The red indicator is off and the green indicator is on
3. Product Usage