User's Manual

11
Cleaning of Suction Mouth
(1) Firstly, turn off robot cleaner.
(2) Clean up the dust and dirt accumulated in suction mouth.
Clean up the rolling brush
Cleaning of Side Brush
（1）Turn off the switch of robot cleaner, place the bottom of robot cleaner on the flat
ground or desktop, hold the side brush tightly and pull it up to remove it.
（2） After cleaning side brushes, press side brush into the center convex shaft of brush
holder and install it on right position
（3）If side brush is worn out, please replace it with a new one to achieve the best cleaning
effect.
Clean the foreign matters at the dust suction port