User's Manual

Operation

Press key to enter into the tire ID No. read mode, press

key to select the tire, selected tires keep in flashing state.

(Tire ID No. read setting)

Before system work properly, the tires ID No. need to be read,

then the transmitter can send data to the receiver real-time.

Press key to select function display mode

Press key to save Settings or press key not to save

the settings, and return to the the nd step of current display

mode, press key to return to the current display mode

Press key, the No. on corresponding location of selected

tire start flashing, waiting to receive the ID signal. At this time

deflate the selected tire( reference the following [ ])After

received the ID signal, the buzzer start buzzing and the

digital flashing frequency speed up.

Note