Operating Instructions

5
DEUTSCHENGLISH
Placing the device in operation
Switching on/o
Switching on/o with the button
For switch-on, press the button.
For switch-o, hold the button pressed for more
than 2 seconds.
Switching on/o via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched o with the button, it is
switched on or o with the ignition.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (o) to 39
(maximum).
Press the / button and drag left/right on the
volume bar to change the volume.
Muting the car sound system (Mute)
Briey press the button to mute the device or to
reactivate the previous volume.
Main menu
In the main menu, you press the buttons on the touch-
screen to call up the dierent sources and operating
modes.
Press the [ ] button.
- Or -
In the current source, press the top left corner.
The main menu is displayed.
As long as you do not select a new audio source, the
last active audio source is played back.
Note:
The gures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.
Setting the reception area
This car sound system is designed for operation in
dierent regions with dierent frequency ranges and
station technologies. The factory default of the reception
area is "USA1 (FM/AM)". You can set a dierent reception
area.
In the main menu, press the button.
The Setting menu is displayed.
In the left area of the Setting menu, press the
General button.
The current setting is displayed behind "Radio Area".
Tap on the Radio Area button to display the list of
available reception areas.
Select the desired reception area.
The list is hidden, the selected reception area is set.
Press the button.
The main menu is displayed again.
Startup