KD200 Contents Product Overview .................................................. 2 Tablet Introduction .................................................. 2 Product and Accessories .............................................. 2 Product Connection ................................................ 5 Driver and Setting ................................................. 9 Install Driver ....................................................... 9 Driver Interface Preview .........................................
KD200 Product Overview Tablet Introduction Thanks for choosing HUION INSPIROY Keydial creative pen tablet. This is a new generation of professional battery-free drawing tablet, which can greatly improve your work efficiency of painting and creation, and full of fun. You can freely painting and writing, depicting different lines and colors, just as the pen writes on the paper, which brings you a real shock experience.
KD200 Product and Accessories Please see the detailed product introduction. *Press Keys 1. Dial: While the Dial mode, features are programmable, with default functions being canvas size adjustment, brush size adjustment and canvas scrolling.
KD200 2. Long press to call up the function menu /Serve as Enter Button. 3. Press keys that are programmable on the driver. 4. Num Key: Switch the alternative functions of keys.
KD200 Product Connection The tablet supports the connection of a computer and a mobile phone. Wired Connection, Bluetooth Connection and Navo Receiver Connection.
KD200 Imporantly, you can judge the status of the device by observing the color of the light. Indicator Color of light Status of Mini keyboard Bluetooth indicator Flash Blue Light Blue Light Battery indicator Num indicator Flash Red Light Pairing Bluetooth Paired Low Battery Red Light Charging Green Light Charged White Light Alternative Functions of Keys are Activated 1. Wired Connection Connect the tablet to your computer with USB cable. Please follow the steps below: 1.
KD200 2. Bluetooth Connection PC and Android devices are supported to be paired with Bluetooth. Please follow the steps below: 1. Activate Bluetooth on PC or any Android device. 2. Long press the power button for 2 seconds till the blue light flashes to power on the pen tablet. 3. Have the device Inspiroy Keydial connected via Bluetooth pairing, Please hold the key combos Shift+Ctrl+Start Command to adjust the imaging on your phone in case of display distortion.
KD200 3. Nano Receiver Connection A nano receiver is available for PC without Bluetooth. Please follow the steps below: 1. Long press the power button for 2 seconds till the blue light flashesto power on the pen tablet. 2. Insert the nano receiver into the PC and a blue light will be on to indicate the connection success.
KD200 Driver and Setting Install Driver Please download the driver from our website: Driver-KD200 Note: 1. Before installing driver, please close all graphic software and antivirus program. 2. If you have installed other pen tablet driver, please uninstall it before you install this driver. 3. Please make sure your computer OS are as following: Windows 7 or later, macOS 10.12 or later. 4. Run the tablet driver program and complete the installation according to the instruction.
KD200 10 / 39
KD200 Driver Interface Preview 1. Pen Tablet Pen Tablet function setting interface, the users can set the tablet function on this interface, such as Press Key, Dial and Working Area. See Section 2. Digital Pen The users can set the Pen function on this interface. About Press Key, Mode selection, Pressure Sensitivity Adjustment and Pressure Test. See Section 3.
KD200 Huion Store, where you can get the latest information about the product such as its FAQ or sales promotion. Additionally, you can also purchase other products or accessories on Huion Store. 4. Add Programs You can customize different functions on the current device for different programs. When select All programs, the setting of the device is valid for every program.
KD200 You can enter a name for the keystroke, then select the property of the keystroke and customize the function. 1. Keyboard Key Click on the input box above and enter a valid key combination to creat a shortcut. For example "Ctrl+A", "Ctrl+Z", and so on.
KD200 2. Mouse Key Select the function of a Mouse or Wheel. Please see the picture below for detailed functions. Mouse: Left Button, Right Button, Middle Button. Wheel: Wheel Forward, Wheel Backward. Double-Left Click.
KD200 3. Switch Select Switch Screen or Switch Brush. Note: Some software does not support the "Switch Brush" function. 4. Run Program Browse and select a program that you want to launch quickly. After the setting, you can launch that program with just a single press.
KD200 5. System Application The table below are the functions of Windows and Mac Systems that can be customized on the Keys. 6.
KD200 To realize the functions such as previous song, next song, play/pause, volume up, volume down. 7. None When select None, the keys will have no function. Working Area Select the Working Area tab to define the relationship between pen movement on the tablet and cursor movement on the monitor screen. By default the entire active area of tablet maps to the entire monitor.
KD200 1> Enter coordinate values. 2> Drag the corners of the foreground graphic to select the screen area. 2. Rotate Working Area By changing the direction of the tablet to adapt to the left and right hand operation. You can rotate the tablet by 0°,90°,180° or 270°.
KD200 3. Display Mapping If you are using multiple displays, you can select 'All Display' to map the working area to all displays. After mapping to all displays, you can use the digital pen to operate these displays.
KD200 Dial Function Setting You can customize the features of the Dial, and you can uncheck "Enable Dial" in the lower left corner to turn off the Dial function. Click the Dial for a pop-up box where you can see the three groups of current settings and to modify them. There are four properties for the Dial, which are Default, Multimedia, Customize Function, and None.
KD200 1. Default Features You can zoom in/out on canvas, Adjust Brush Size, Scroll Up/Down.
KD200 2. Multimedia To realize the functions such as previous song, next song, play/pause, volume up, volume down. 3.
KD200 Input the features under rotate right / rotate left. After the setting, you can rotate the Dial to realize corresponding features. 4. None When select None, the keys will have no function. Digital Pen Setting 1. Press Key The function setting is the same as the Press Key setting of the tablet. Please refer to it.
KD200 2. Pen Nib Activity The pen nibs can be set to be Valid/Invalid as needed. Click the drop-down option to select. In Valid mode, the digital pen can be used normally. In Invalid mode, the digital pen has cursor movement, but cannot complete the specified action.
KD200 3. Enable Windows ink Microsoft Windows provides extensive support for pen input. Pen features are supported in such as Microsoft Office, Windows Whiteboard, Adobe Photoshop CC, SketchBook 6 and so on.
KD200 4. Mode Selection Game Mode: This mode is specially designed for OSU games. OSU game users can turn on the "Game Mode" to increase the cursor's following speed when the pen tip moves quickly. It is not recommended for non-OSU game users. Mouse Mode: When the digital pen moves on the tablet work area, the"absolute coordinate" mode is adopted by default. After selecting the "mouse mode", it will change to the "relative coordinate"mode. At this time, the user can use the digital pen like a mouse.
KD200 5. Pressure Sensitivity Adjustment The pressure sensitivity will be changed by dragging the slider up and down, the smaller the value, the more pressure sensitive. Click the Redo button at the top right of the Settings box to reset the pressure sensitivity to the default state.
KD200 6. Pressure Test You can gradually apply pressure to the stylus on the screen to test the pressure level. Click the Clear button to clear all the ink.
KD200 Driver Setting 1. Device You can view product information.
KD200 2. Backup The Driver can import and export your custom settings, which helps to avoid repeated settings when launching a different program.
KD200 3. General Setting [1] Language: Click the drop down menu to select a language. [2] Color: You can select the color of the Driver interface among Dark, Blue, and Light according to your preference. [3] Start Menu: Click to enable or disable AutoStart, New Message Alert, Automatic Updates. [4] Hotkey: A hotkey can be used to call out the Driver interface quickly, you can set one according to your usage habits.
KD200 4. About Users can check the Driver version number here. Click Check for Updates to view the latest Driver version and then follow the prompts to update the Driver if needed.
KD200 Digital Pen Basic Operation Note: Picture shown is for illustration purposes only. Hold the Pen Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen. Note: When not in use, place the pen in the pen case or on the desk.
KD200 Position the cursor Move the pen slightly above the active area without touching the screen surface, the cursor will move to the new position accordingly. Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click.
KD200 Click Use the pen tip to tap once on the screen to register a click. Tap to highlight or select an item on the screen and double-click to open it. Move Select the object, then slide the pen tip across the screen to move it.
KD200 Use the side buttons The buttons on the pen can be set to two different customizable functions. You can use the buttons whenever the pen tip is within 10mm of the tablet active area. You do not have to touch the pen tip to the tablet in order to use the switch. Pen Nib Replacement The nib will be wear off after using for a long time, then you need to replace a new nib. 1. Anticlockwise rotate the pen holder to open the cover, take a new nib out. 2.
KD200 Specifications Here are the product specifications for you to learn more about the Tablet. If you have any questions, please feel free to contact us. The following data will vary in different usage environments and are for reference only. Appearance Color: Metal Grey Dimension: 394.5 × 187.7 × 8.5mm Workspace: 226 x 142.
KD200 Pressure Sensitivity: Tilt Support: Sensing Height: 8192 Levels ±60° 10mm Report Rate: ?233PPS Accuracy: ±0.3mm Press Keys: 23 Standard keys+5 Programmable Press Keys+Dial OS Compatibility Windows 7 or later macOS 10.12 or later Android 6.0 or later Troubleshooting Solutions There is no pressure in the graphics software but the cursor moves. You may have installed other tablet drivers or opened the drawing software when installing the driver.
KD200 When pressing the side button, please make sure that the nib didn't touch the tablet surface and the distance between the nib and surface is within 10mm. If your problem is not resolved, please clickFAQsto view more troubleshooting methods or email us(service@huion.com). 39 / 39 Powered by TCPDF (www.tcpdf.
