PRODUCT SPECIFICATION Version 1.0 WIFI Module Model Number: W2YM2510 (MT7603UN) 客户认可 Custom Approval Section Custom Name Department Approval Date： 拟制 DESIGN 审核 CHECK 批准 APPROVAL 李茂松 马毅 陈宇科 2018/10/23 2018/10/23 2018/10/23 惠 州 高 盛 达 科 技 有 限 公 司 HUIZHOU GAOSHENGDA TECHNOLOGY CO., LTD 中国惠州仲恺高新技术开发区华宇路 75 号 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL：（0752）2096628 E-mail： lims@gaosd.
PRODUCTS SPECIFICATION W2YM2510 Document revision history Revision Version 1.0 Date Approved by 2018-10-23 Remarks Draft PAGE 2 OF 10 Version 1.
PRODUCTS SPECIFICATION 1. W2YM2510 General Description W2YM2510 is to specify the product requirements for 802.11b/g/n USB Module. This Card is based on MTK MT7603UN chipset that complied with IEEE 802.11n,and it is also backward complied with IEEE 802.11b/g standard from 2.4~2.5GHz.It can be used to provide up to 54Mbps for IEEE 802.11g, 11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n to connect your wireless LAN.
PRODUCTS SPECIFICATION W2YM2510 3. Application Diagrams 3.1 General Requirements 3.1.1 IEEE 802.11b Section Feature 3.2.1.1 3.2.1.2 3.2.1.3 3.2.1.4 3.2.1.5 3.2.1.6 3.2.1.7 3.2.1.8 Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector Detailed Description ● IEEE 802.11b ● DQPSK , DBPSK and CCK with DSSS ● 2400 ～ 2483.
PRODUCTS SPECIFICATION 3.1.2 IEEE 802.11g Section Feature 3.2.2.1 3.2.2.2 3.2.2.3 3.2.2.4 3.2.2.5 3.2.2.6 3.2.2.7 3.2.2.8 Standard Radio and Modulation Type Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector W2YM2510 Detailed Description ● IEEE 802.11g ● QPSK , BPSK , 16QAM ,64QAM with OFDM ● 2400 ～ 2483.
PRODUCTS SPECIFICATION 4. W2YM2510 Electrical and Thermal Characteristics 4.1 Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 Maximum Units -40 0 0 +80 60 125 ℃ ℃ ℃ General Section 4.2.1 4.2.2 4.2.3 4.2.4 4.3 Minimum Feature Detailed Description Antenna Type Operating Voltage Current Consumption USB ● ● ● PIFA antenna 5V±10% 450 mA at continuous transmit mode ● High Speed USB2.
PRODUCTS SPECIFICATION W2YM2510 5. Mechanical Characteristics 5.1 Mechanical Requirements 4.4.1 Feature Length Detailed Description ● 70mm 4.4.2 Width ● 45mm 4.4.3 Height ● 1.6mm(PCB) 5.2 Mechanical Dimensions PAGE 7 OF 10 Version 1.
PRODUCTS SPECIFICATION W2YM2510 Size error range: 5.3 DIM (MM) Tolerance (MM) 0-5 ±0.15 5-10 ±0.20 10-50 ±0.30 Pin Description Pin 1 2 3 4 5 6 7 8 9 10 GND D- NC D+ WL_Host_Wake GND NC Reset Definit VCC VCC ion (5V) (5V) (Internal (Internal pull-up 10K Ohm) pull-up 10K Ohm) PAGE 8 OF 10 Version 1.
PRODUCTS SPECIFICATION W2YM2510 Appendix : Connector PAGE 9 OF 10 Version 1.
PRODUCTS SPECIFICATION W2YM2510 mode PAGE 10 OF 10 Version 1.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
