Operating Instructions

8
(6) ANALOG CHRONOGRAPHS –
TYPE A
W
ith day/date/24-hour hand
Legend
1, 2, 3
– Crown positions
Button A – Start/Stop
Button B – Reset
H – Hour hand
M – Minute hand
S – Second hand
P – Chronograph Minutes Counter Q
– Chronograph Seconds Counter J –
24-Hour hand
K -- Date window
Crown Positions:
Position 1 - Normal running position; crown pushed into case.
Position 2 - To set TIME: if no date function.
To set DATE: applicable with date function.
Position 3 - To set TIME: applicable with date function.
The time measured indicated by the stopwatch hands is
independent from the center hands.
The stopwatch can measure up to 30 minutes.
To set the time:
1. Pull crown out to position 2 when the second hand is at the 12
o’clock position, watch stops.
2. Turn crown in either direction to move hands to desired time.
* If applicable for your model, make sure to respect AM/PM (J)
* Do not press any button, otherwise the chronograph hands will
move.
3. Push crown back in to position 1; watch restarts, now set toc
correct time.
To set the date (if applicable):
If your watch has a date window, your crown will have
3positions.
Position 2 is used to set the date:
1. Pull crown out to position 2.
2. Turn crown clockwise until the correct date appears.
Crown Position 3 is used to set the time as per above
explanation.
Simple Chronograph Functions:
To measure the duration of a single, non-stop event (up to 60
minutes):
1. Press pushbutton A to start chronograph.
2. Press pushbutton A a second time to stop chronograph.
3. Press pushbutton B to reset chronograph hands to zero.
Measuring Cumulative Times:
1. Press pushbutton A to start chronograph.
2. Press pushbutton A to stop chronograph timing.
3. Press pushbutton A to restart.
4. Repeat steps 2 and 3 as many times as desired.
5. When through timing, press button B to reset chronograph
hands to zero.
Measuring Split Times:
1. Press pushbutton A to start chronograph.
2. Press pushbutton B to momentarily stop chronograph and
read an intermediate or split time.
3. Press pushbutton B to restart; chronograph hands will
advance rapidly to catch up with ongoing event.
4. Repeat steps 2 and 3 to take as many intermediate or split
times as desired.
5. Press pushbutton A to stop chronograph timing.
6. Press pushbutton B to reset chronograph hands to zero.
Figure A
Q
P
1 – 2 – 3
S
H
M
A
K
B
J