Operating Instructions

6
(4) MULTI-EYE MODELS – TYPE A
With day/date with or without 24-hour hand without pushers
1, 2, 3 – Crown positions
H – Hour hand
M – Minute hand
S – Seconds hand
J – 24 Hour hand
T – Date hand
D – Day hand
Crown positions:
Position 1 – Normal running position; crown pushed into case.
Position 2 – To set DATE: Rotate crown clockwise.
Position 3 – To set TIME: Rotate crown in either direction.
To set the time:
1. Pull crown out to position 3 when the second hand is at the
12 o’clock position, watch stops.
2. Turn crown clockwise to advance the hour and minute hands
until the day hand is set to the desired day of the week, if
applicable for your model. The day hand will not move back by
turning the crown counterclockwise.
3. Turn crown in either direction to move hands to desired time.
The 24 hour hand J is moving correspondingly with the hour
hand. When setting the minute hand, advance it 4 to 5 minutes
ahead of the desired time and then turn it back to the exact
time.
4. Push crown back in to position 1; watch restarts, now set to
correct time.
To set the date:
1. Pull crown out to position 2.
2. T
urn the crown counterclockwise to set the date hand.
Do not set the date hand between 9:00pm and 2:00am. The
date hand will not move back by turning the crown clockwise.
3. Push crown back in to position 1; watch restarts, now set to
correct date.
H
T
M
S
Figure A
D
1 – 2 – 3
H
S
M
Figure B
T
D
1 – 2 – 3
J
H
M
S
Figure C
J
1 – 2 – 3
T