Installation Guide

6
Wall corner
Filler
6 If you do not have a corner, start with the
end closest to a wall, making sure to leave
room for the required ller, as per your
plan.
7 Set the next cabinet tight to the rst cabinet
and use clamps to hold in place while you
level it and make sure that the front edges
are ush. Attach the two cabinets together
using 1 1/8" particle board screws. Attach the
cabinet to the wall with 2 1/2" screws into the
studs. Continue with the same process for
all upper cabinets.
Cleat
Cleat
6"
6"
6"
6"
8 Always start with the
corner base cabinet,
making sure it is level.
Position the corner cabinet
6" away from the wall
on both sides as shown.
NOTE: the cabinet must
have 6" of clearance from
the back of the cabinet
to each wall in order to
align properly with the
other base cabinets.
For countertop stability,
attach two cleats (or
wood strips) using screws
onto each wall as shown,
ensuring their top edges
align with the 34 1/2" mark.
This will help support the
weight of the countertop
in the back corner.