Installation Guide

5
1 Verify that walls are square and level.
Walls that are not square or level will make
installation more difcult. You can use the
3, 4, 5 method shown to check your corner.
2 Before beginning installation, you must
rst nd the highest point of your oor by
checking it with a level.
3 Use a stud nder to mark all the studs
that will be used to install your cabinets.
4 Draw a level line at 34 1/2" from the highest
point of your oor and another level line at
54" from the same point. Install the top of
the base cabinets level with the 34 1/2" line,
using shims to level the cabinets as needed.
Install the bottom of the wall cabinets level
with the 54" inch line.
5 Starting with the corner wall cabinet,
install (x4) 2 1/2" cabinet screws through
the fastening strips on the cabinet into the
wall studs. Be sure to check for level before
fastening the cabinet into place.