Installation Guide

4
3. INSTALLATION
UNDERSTANDING OUR CABINET CODES (EXAMPLES). All measurements will be referred to in imperial.
CODE DESCRIPTION
W1830 Wall cabinet 18" wide and 30" high
WA2430 Wall angle corner cabinet 24" wide and 30" high
B30 Base cabinet 30" wide with 2 doors and 1 top drawer, 34 1/2" high
UC1584 Utility cabinet 15" wide and 84" high
GETTING STARTED
• Check to make sure the cabinets and accessories that you have received are what you
ordered: if anything is not on site, then do not start your project until you have everything
required.
• Double-check that you have all the required tools.
• Appliances should be moved to another room for easier maneuvering in the work area.
• Walls should be nished with the rst coat of paint applied.
• Final ooring should be installed, including the areas that will have cabinets.
84" utility cabinet with 30" wall cabinet
84"
54"
34 1/2"
All dimensions are taken with
the nished oor installed.
It is common that nished oors
are not perfectly level. All cabinets
should be shimmed up from the
oor level using wood or composite
shims to the 34 1/2" line.
All cabinets should also be shimmed
out from the walls to maintain a
straight line. The "frameless" design
of Hugo&Borg cabinets allows
cabinets to be screwed directly
together, creating a straight line,
even if the wall is uneven.
Please follow the next steps for the
correct installation of your cabinets.