Installation Guide

ADJUSTING DOOR HINGES

ADJUSTING DRAWER FRONTS

Up and Down Adjustment

A tab is located on each side of the drawer bottom. For up/down adjustments, slide the tab left or

right as needed. Adjusts the height (up/down) of the drawer front up to 2 mm. NOTE: drawer removal

is not required or recommended for adjustments.

Left and Right Adjustment

Loosen each screw as shown and nudge the drawer front to the left or right as needed. Once the

drawer front is in the desired spot, tighten each screw to secure. Adjusts the drawer up to 2 mm.

Side Adjustment

Using a Phillips screwdriver,

rotate screw (1) clockwise

to move the door left and

counter-clockwise to move

the door right. Moves the

door up to 2 mm.

Depth Adjustment

Using a Phillips screwdriver,

rotate screw (2) clockwise to

move the door forward and

counter-clockwise to move

the door backwards. Moves

the door up to 2 mm.

Height Adjustment

Using a Phillips screwdriver,

rotate screw (3) clockwise to

move the door upward and

counter-clockwise to move

the door downward. Moves

the door up to 2 mm.

Up and down

adjustment

Left and right

adjustment

Tabs

Loosen each screw

before adjusting

Tab