Installation Instructions
Table Of Contents
- Title page
- Contents
- About this manual
- Safety information
- Ch 1 - Introduction
- Ch 2 - Adding cards to the Controller
- Unpacking the System Controller
- Unpacking the picocells
- System Controller card configuration
- Adding cards to the System Controller (first steps)
- Jumper and DIP switch settings
- Attaching bus cables
- Adding cards to the System Controller (final steps)
- Configuring Controller cards
- Verifying the card configuration
- Ch 3 - Installing the Controller
- Ch 4 - Verifying the Controller configuration
- Ch 5 - Configuring the router
- Ch 6 - Testing picocells
- Ch 7 - Installing picocells
- Ch 8 - Connecting to external equipment
- Ch 9 - System testing
- Ch 10 - Installation inspection
- Ch 11 - Provisioning
- Ch 12 - Remote Client
- Ch 13 - Troubleshooting
- Ch 14 - Maintaining Quad T1 cards
- App A - Specifications
- App B - Standards compliance information
- App C - Part numbers
- App D - Updates and backups
- Index
1026209–0001 Revision B vii
NAM status 6–27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initializing settings 6–28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 Installing picocells 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 Preparing for picocell installation 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2 Mounting the picocells 7–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the mounting plate 7–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3 Installing and connecting picocells 7–7. . . . . . . . . . . . . . . . . . . . . . . . . .
Warnings and cautions 7–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Picocell connections 7–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting the picocell 7–12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T1 wiring and flip 7–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check for proper operation 7–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.4 Performing the frequency band scan 7–18. . . . . . . . . . . . . . . . . . . . . . . . .
8 Connecting to external equipment 8–1. . . . . . . . . . . . . . . . . . . . . . . .
8.1 Connecting the Controller to the PBX 8–2. . . . . . . . . . . . . . . . . . . . . . .
8.2 Installing the SSL certificate 8–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating the request file 8–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Requesting the certificate 8–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Completing the certificate 8–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the certificate 8–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3 Repointing the HLR 8–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4 Installing a second LAN card and driver (optional) 8–9. . . . . . . . . . . . .
Installing the LAN card 8–9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the LAN card driver 8–9. . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5 Enabling alarm paging 8–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the external modem 8–11. . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring the AIReach OS for alarm paging 8–12. . . . . . . . . . . . . .
9 System testing 9–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.1 Testing RF coverage 9–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2 Performance testing 9–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Installation inspection 10–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 Provisioning 11–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1 Provisioning permanent subscribers 11–1. . . . . . . . . . . . . . . . . . . . . . . . .
12 Remote Client 12–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.1 AIReach OS Remote Client 12–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Requirements 12–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2 Installing the Remote Client 12–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windows 95 or Windows 98 12–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3 Testing the Remote Client 12–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .