Installation Instructions
Table Of Contents
- Title page
- Contents
- About this manual
- Safety information
- Ch 1 - Introduction
- Ch 2 - Adding cards to the Controller
- Unpacking the System Controller
- Unpacking the picocells
- System Controller card configuration
- Adding cards to the System Controller (first steps)
- Jumper and DIP switch settings
- Attaching bus cables
- Adding cards to the System Controller (final steps)
- Configuring Controller cards
- Verifying the card configuration
- Ch 3 - Installing the Controller
- Ch 4 - Verifying the Controller configuration
- Ch 5 - Configuring the router
- Ch 6 - Testing picocells
- Ch 7 - Installing picocells
- Ch 8 - Connecting to external equipment
- Ch 9 - System testing
- Ch 10 - Installation inspection
- Ch 11 - Provisioning
- Ch 12 - Remote Client
- Ch 13 - Troubleshooting
- Ch 14 - Maintaining Quad T1 cards
- App A - Specifications
- App B - Standards compliance information
- App C - Part numbers
- App D - Updates and backups
- Index
B.4
B.5
1026209–0001 Revision B B–4 Standards compliance information
CE compliant
CSA950
Complies with EMC Directives
In Case IEC320 with ground
TUV/IEC950
UL1950
AWS Wireless Office Service System Specification, Document
WOS–97–01, Rev 1.0
The BTS complies with the latest revision of TIA/EIA/IS–136.1A
and TIA/EIA/IS–136.2A.
EIA/TIA–232–F, Interface between data terminal equipment and
data circuit terminating equipment employing serial binary data
interchange, October 1997
TIA/EIA–568A, Commercial Building Telecommunications
Cabling Standard
TIA/EIA–606, Administration Standard for the
Telecommunications Infrastructure of Commercial Buildings
CSA Standard T528, Design Guidelines for Administration of
Telecommunications Infrastructure in Commercial Buildings
CSA Standard 529, Design Guidelines for Telecommunications
Wiring Systems in Commercial Buildings
EN 50082–1, Electromagnetic compatibility – Generic immunity
standard part 1. Residential, commercial, and light industry, 1997
IS130A, July 1997
IS135, April 1995
IS136A (updates provided per Terms of Conditions):
• IS136.1A specifies the Digital Control Channel
• IS–136.2A specifies the Digital Traffic Channel
• RF performance complies with the latest revision of
IS–138A, with the exception of delay interval compliance,
which is not required for this short–range base station
IS138A (updates provided per Terms of Conditions)
IEEE–C62.41 class A and B. The PSS complies with the
requirements of this standard.
MIL–HDBK–217F Military Handbook, Reliability prediction of
Electronic Equipment, 1992
National Electrical Code, Section 800 – latest code
WBSU–WOSC Interface Specification Avalcom document No.
A9.20.0002
Picocell power
su
pp
l
y
com
p
liance
Other compliance