Installation Instructions
Table Of Contents
- Title page
- Contents
- About this manual
- Safety information
- Ch 1 - Introduction
- Ch 2 - Adding cards to the Controller
- Unpacking the System Controller
- Unpacking the picocells
- System Controller card configuration
- Adding cards to the System Controller (first steps)
- Jumper and DIP switch settings
- Attaching bus cables
- Adding cards to the System Controller (final steps)
- Configuring Controller cards
- Verifying the card configuration
- Ch 3 - Installing the Controller
- Ch 4 - Verifying the Controller configuration
- Ch 5 - Configuring the router
- Ch 6 - Testing picocells
- Ch 7 - Installing picocells
- Ch 8 - Connecting to external equipment
- Ch 9 - System testing
- Ch 10 - Installation inspection
- Ch 11 - Provisioning
- Ch 12 - Remote Client
- Ch 13 - Troubleshooting
- Ch 14 - Maintaining Quad T1 cards
- App A - Specifications
- App B - Standards compliance information
- App C - Part numbers
- App D - Updates and backups
- Index
1026209–0001 Revision B
Equipment specifications A–1
Appendix A
Equipment specifications
This appendix lists preliminary specifications for the AIReach OS
equipment:
• System Controller specifications – page A–1
• Picocell specifications – page A–4
• Picocell power supply specifications – page A–6
All specifications in this appendix are preliminary and are subject
to change.
The AIReach OS System Controller provides the mobile switching
functionality. The System Controller is connected to multiple
picocells to provide wireless coverage and to the internal PBX to
integrate with desktop phones and outside lines.
The drive bays are protected with a door that can be latched and
locked.
The mechanical requirements are:
• Height: 10.47 inches (6 rack units)
• Width: 19 inches
• Depth: 19 inches
• Weight: 50 pounds when all components are installed
Shipping size
• Height: 20 inches
• Width: 27.5 inches
• Depth: 24.5 inches
WARNING
The AIReach Office System Controller can
weigh in excess of 50 pounds. To avoid
personal injury or damage to equipment,
follow these precautions:
• Do not attempt to move or install the
System Controller by yourself. Two
people are required for these tasks.
• Do not stack more than three System
Controller boxes.
A.1
System Controller
specifications
Security
Mechanical