Installation Instructions

1026209–0001 Revision B 8–16 Connecting to external equipment
Sample entries for numeric pager with phone number
888–886–3647 and PIN number 348593:
pagingEnabled yes
pagerType numeric
serviceNumber 18888863647
pin 348593
Sample entries for beeper with beeper number 703–580–2077:
pagingEnabled yes
pagerType beeper
beeperNumber 17035802077
Creating a new provider ID
If the customer’s paging provider or service is not listed in Table
8-1 , follow the procedure illustrated below to create a new
provider ID.
The steps below illustrate how to add a new phone number for a
service provider and create a new provider ID. In this example, the
new provider is a TAC service provider with the phone number
1–800–679–2778:
1. Double–click the HipLink icon in the Windows system
tray.
2. Select Modify → Network service.
3. Click New.
4. In the Network description field, enter a description to
identify the service (30 characters maximum):
Tac New Service
5. Click the Phone field.
The Network Key field now shows TACNEW (in all capital
letters). This is the service provider name (6 characters
maximum) to be entered in the ArosPageInfo.dat file.
(See step 4 on page 8–13.)
6. Enter the phone number (800–679–2778) in the phone field.
7. Set the maximum message length to 200 characters.
Note
If the service supports a message length of less than 200
characters, the message may be truncated.
8. Leave all other (default) values as they are.
9. Save the modified Network service definition.
10. Enter TACNEW as the service provider name in the
ArosPageInfo.dat file, and save the file.