Installation Instructions

1026209–0001 Revision B
Connecting to external equipment 8–7
Install the SSL certificate:
1. Open the AIReach Office Application if it is not already
open.
2. Select Configure → NSS → Systemwide to open the
System Configuration window.
3. Click the Transport tab.
4. In the WOS to Gateway Server Address line, enter the
gateway address and port number. (Obtain these from the
gateway provider.)
5. Click Save.
6. By default, the IS–41 link is configured to operate in secure
mode. If the IS–41 interface is operating in clear mode,
make these changes:
a. Enter the clear mode address and port in the
Transport window.
b. Edit the startup.dat file in the bin directory of
the current release: Change the router startup option
from –ATTSSL to –ATT (clear mode).
7. Click the ROUTER application on the taskbar to verify
router connectivity (heartbeat received) to the IS–41
gateway.
If the gateway connection is active, the ROUTER window
displays messages indicating that heartbeat has been
received:
If a heartbeat is not received, ping the gateway to try to determine
where the problem is. If you cannot resolve the problem, notify the
service provider representative responsible for establishing IS–41
connectivity.
Installing the certificate