Installation Instructions

Table Of Contents
10262090001 Revision B
Testing picocells 6–27
To program the Operator Code (SOC):
1. Press
until the Operator Code (SOC) displays and
press
.
2. Verify that the Operator Code displays 4.
3. If the Operator Code is incorrect, press
, enter 4, and
press
.
To program the NAM Status for a Nokia series 6000 phone:
1. Press
or (right button) until NAM1 displays and press
.
2. Press
until Change Defaults displays and press .
3. Verify that the NAM Status displays enabled.
4. If the NAM Status is incorrect, highlight enabled and press
.
5. Press
(right button) until NAM1 is highlighted.
6. Press
until NAM2 displays and press .
7. Press
until Change Defaults displays and press .
8. Verify that the NAM Status displays disabled.
9. If the NAM Status is incorrect, highlight disabled and
press .
10. Press
until NAM3 is highlighted and press .
11. Press until Change Defaults displays and press .
12. Verify that the NAM Status displays disabled.
13. If the NAM Status is incorrect, highlight disabled and
press .
Operator Code (SOC)
NAM status