User Manual

14 Hughes 9250 BGAN Terminal User's Guide 1.1
DECLARATION OF CONFORMITY
Hughes Network Systems, LLC, of 9605 Scranton Road, San Diego, CA, 92121, USA, declares
under our sole responsibility that the product Hughes 9250 Satellite IP Terminal to which this
declaration relates, is in conformity with the following standards and/or other normative
documents:
ETSI EN 301 444 , ETSI EN 300 328, ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 301 489-20, EN
60950-1, Council Recommendation 1999/519/EC.
We hereby declare that all essential radio test suites have been carried out and that the above
named product is in conformity to all the essential requirements of R&TTE Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex [III] or [IV] of
Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
Washington Laboratories, LTD, 7560 Lindbergh Drive, Gaithersburg, MD 20879, USA
Identification mark: 1317 (Notified Body number).
The technical documentation relevant to the above equipment will be held at:
Hughes Network Systems, LLC, 9605 Scranton Road, San Diego, CA, 92121, USA
Signed by Juerg Widmer (Senior Technical Director, January, 2007) and Bill Lindsay (Senior
Program Manager, January, 2005).
;
Note
The Ethernet cable used with the Hughes 9250 shall not be longer than 3 meters to
comply with ETSI emissions requirements.
FCC COMPLIANCE
This device conforms to the FCC rules. Any changes or modifications to Hughes Network
Systems’ equipment, not expressly approved by Hughes Network Systems, could void the user's
authority to operate the equipment.
To comply with FCC RF exposure requirements, this device must be operated with a minimum
separation distance of 20 cm or more from a person's body. Other operating configurations
should be avoided.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions; (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.