User Manual

Hughes 9250 BGAN Terminal User's Guide 1.1 5
USING THE HUGHES 9250
AUTO START CONFIGURATION
Since the Hughes 9250 is equipped with a tracking antenna, the default configurations for the
Hughes 9250 Land Mobile Terminal are as follows:
 The Hughes 9250 is configured for automatic registration with the network: The terminal will
automatically attempt to register with the network once the tracking antenna has acquired
the satellite signal.
 The Hughes 9250 is configured for Auto “On” Mode: The terminal automatically power sup
when the DC power adapter is plugged in.
;
Note
These default configurations are accessible through the LaunchPad “Auto Start
Mode” menu. It is recommended to keep these settings for convenient operation
of the Hughes 9250 Land Mobile Terminal.
FEATURES OF THE HUGHES 9250
The User should be aware of the following differences between the Hughes 9250 Land Mobile
Terminal and the Hughes 9201 Satellite Terminal:
 The Hughes 9250 is configured for automatic registration with the network as discussed
above.
 The Hughes 9250 will automatically power off after 30 seconds when the DC power adapter
is removed, even though a battery is inserted. This feature will prevent the user from
operating the power button to operate the terminal.
 The Hughes 9250 operates as a BGAN Class 2 terminal. It can therefore not establish 256Kbps
streaming class connections.