User's Manual

 Technical Specifications
Revision 0.2
45
Satellite TX Frequency
1626.5 – 1660.5 MHz and 1668 – 1675 MHz
Satellite RX Frequency
1518 – 1559 MHz
GPS Frequency
1574.42 – 1576.42 MHz
SAT Continuous TX Time (@128kpbs)
Up to 2.5 hours
note1
SAT Continuous RX Time (@128kbps)
Up to 4 hours
note1
SAT Standby Time
Up to 36 hours
note1
Weight
< 1.8Kg
Dimensions
216 mm x 216 mm x 45 mm
Operating Temperature (with battery)
-5°C to +55°C
Operating Temperature (with DC supply)
-25°C to +60°C
Battery Charging Temperature
0°C to +40°C
Storage Temperature (including battery)
-20°C to +80°C
Storage Temperature (excluding battery)
-25°C to +80°C
Humidity
95% RH at +40°C
Wind
Operational wind loading (with stand secured to ground)
40kph (25mph)
Water and Dust
IP 54 Compliant
Non-operational Mechanical Vibration
200-2000Hz, 0.3 m2/s3
MIL-SPEC 810B Method 500.3, Procedure 1
Input Voltage
19V 3.4A
note2
Battery
7.2V 2.5Ah Li-Ion, rechargeable
Data Connectivity
RJ45 port (Ethernet 10BaseT)
RJ11 port (POTS)
RJ45 port (ISDN)
802.11b WLAN
Other Features
Integrated User Interface (iUI) via LCD panel
Web User Interface (WebUI)
SIM/USIM Slot (behind battery)
AC/DC adapter
Rechargeable Li-Ion battery
¼ inch UNC threaded hole for tripod mounting
Compass to assist pointing
Note:
1. Performance may be affected by a wide range of factors.
2. The Hughes 9202 broadband satellite terminal operates on DC power which can be supplied by an
AC or DC power source. To comply with safety requirements, the terminal must be powered with only
an AC/DC adapter or DC power adapter supplied or approved by Hughes.