User's Manual

6
 Using the Hughes 9
Revision 0.2
Connecting the terminal
to the computer
You can connect your computer to the 9202 with one or more
of the following interfaces
 Ethernet
 WLAN
 Integrated Services Digital Network (ISDN)
There is no need to check the active interface. All
interfaces can be used simultaneously to accommodate
multiple users.
 During initial setup, the terminal can only be configured
using an Ethernet connection. Once the terminal has been
configured, all interfaces (Ethernet, WLAN and ISDN) can
be used for data transfer depending on the service required.
Your computer must be configured to support your chosen
connection method. Refer to the documentation supplied
with your computer for details.
Connecting by Ethernet
To connect the BGAN terminal to a device using Ethernet:
 Connect an Ethernet cable to your device‘s Ethernet port,
and insert the other end of the connector into the Ethernet
port on the 9202..
Connecting by WLAN
If you have not previously used the 9202‘s WLAN interface, it
has to be enabled from the internal web UI, Integrated MMI or
LaunchPad with your computer connected to the 9202 using
the Ethernet interface.