User Manual

BGAN Terminal User's Guide 45
 The Power button is used for turning the unit on or off. A
“long” press of the button when the unit is off turns it on, and
a long press of the button when the unit is on turns it off.
 The Audio button is used for switching the audio tones on and
off. These tones are useful during pointing mode (see
description later in the Guide). A “short” press of the button
accomplishes this.
INDICATOR LIGHTS (LEDS) AND AUDIO BUZZER
The LEDs and Audio Buzzer serve as indicators for the status of the
Satellite Terminal. The figures below illustrate where the LEDs are
located on the MT and the functions of each.
P
OWER LED
The Power LED indicates power status.
Light Status