User Manual

BGAN Terminal User's Guide 19
4. Lift up the Terminal while referring to the protractor on the right-
hand side. The protractor gives you the angle at which the unit is
positioned. Note that an angle of zero to 45 degrees is displayed
on the inside portion of the protractor, while a 46 to 90 degree
angle is displayed on the outside portion. The desirable angle is
between 15 and 30 degrees.
5. After you have positioned the Terminal at the desired angle,
tighten the knobs by turning them clockwise. Tighten them so
that they are firm and hold the angle but are still movable in
case further adjustments are needed.