User Manual

BGAN Terminal User's Guide 17
TERMINAL STAND POSITIONING
The positioning of the Satellite Terminal stand at an appropriate
angle is very important as a prerequisite for getting a fix on the
satellite. The Terminal elements used in this process are the knobs,
protractor, and compass.
1. Place the Satellite Terminal on a flat table. Locate the knobs on
one end of the unit. Loosen the knobs by turning them counter-
clockwise.
2. To prepare to lift the Terminal, place a finger in the lower right
hand corner of the unit and place your other hand in the middle
of the unit.
3. Pull out the front stabilizer. Lay the Terminal back on the table.