User's Manual

Thuraya Orion IP User Guide 5
Quick Connect: These buttons access pre-stored connection profiles.
GPS: The display includes the GPS receiver state (On/Off), GPS satellites
visible, GPS validity, compass direction and ADU angle. Once a GPS
position is obtained, the Thuraya Orion IP will provide the compass
direction and degrees of elevation to the satellite. This information can
be used to ensure that the ADU has a clear view of the Thuraya satellite
at the current location.
PROPERTIES SCREEN
The Properties Screen displays a summary of current communications
parameter settings. You can also use this screen to do the following:
Restore Factory Defaults: When you click this button, the restore
message confirmation screen informs you that the terminal is about to
reset to factory defaults. Restoring the factory defaults returns the
Thuraya Orion IP settings to their original, just out-of-the-box state. This
does not change the security code or SIM parameters. Please exercise
caution when proceeding. If you invoke Restore Factory Defaults, you
will need to re-enter any configuration information supplied by your
Service Provider.
Reset Terminal: Reboots the terminal software.
Refill: Connects to the prepaid SIM web site.
Upgrade Modem Software: Connects to the Thuraya upgrader web site.