User's Manual

22 Thuraya IP+ Satellite Modem User Guide
3500799-0001 rev A
WLAN SECURITY SCREEN
The WLAN Security Screen allows you to configure WLAN security parameters,
including enabling/disabling Wired Equivalent Privacy (WEP), hiding the SSID and
setting Media Access Control (MAC) filters.
Access this screen by clicking the WLAN Security Settings
link towards the bottom of
the WLAN Configuration Screen.
WLAN SSID Broadcast
: Enable or Disable SSID broadcast.
Security
: Disable or chose an available security method: Wired Equivalent Privacy
(WEP64 or WEP128), WPA or WPA2.
WEP Key to Use
: Under WEP64, select the active key--Key1 through Key4--from a
pull down menu. For WEP128 only key 1 is available.
WLAN Key Fields, Key 1 through Key 4
: In WEP64 mode, enter a 10 character (0-9,
A-F) key value in each of four text boxes. In 128-bit WEP mode, enter a 26 character
(0-9, A-F) key value in the Key1 text box.
Generate
: Instead of manually entering a key value, you may press the Generate
button to automatically generate a key value.
TKIP/AES Key Update Interval
: Under WPA and WPA2 this timeout determines how
often the working key is changed.
WPA/WPA2 Pass Phrase
: Under WPA and WPA2 enter a secret pass phrase that will
become the master key for WLAN access.
Hide Keys
: Click this button to hide the keys from this display.
MAC Filtering
: Enable or disable MAC filtering. If filtering is enabled, you can enter up
to eight MAC addresses. Only these addresses will be permitted to access the
terminal via the WLAN.