User's Manual

Thuraya IP+ Satellite Modem User Guide 17
3500799-0001 rev A
SETTINGS SCREENS
From the Main menu you can select Settings to navigate among all the various Settings
functions from the menu on the left side of the screen:
 Network Settings
 Security Management Settings
 Login Settings
 WLAN Settings
 Advanced Settings
NETWORK SETTINGS SCREEN
After executing the necessary First Time Set-up steps to configure Thuraya IP+, you
may want to select the Network Settings Screen to check your network configuration.
This screen provides you with control over key network access parameters. Here you
find the appropriate Domain Name Service (DNS) and the Access Point Name (APN)
information configured by your Service Provider. You are also given the ability to
make changes.
Note: Generally your Service Provider has already performed this
configuration step for you. Whenever you modify the addresses on the
Network Settings screen, you must press SAVE and exit the wMMI,
reboot your computer, and power the Thuraya IP+
off and then back on
so that the new settings can take effect.
Private Local IP Address: This setting allows you to change the lower two octets of
the terminal’s local gateway address. Changing this address will change the address of