User's Manual

Thuraya IP+ Satellite Modem User Guide

3500799-0001 rev A

Extract Terminal Summary Log

: Fetched diagnostic data from the terminal which can

be saved on the connected computer.

Current Settings

: provides the current communications parameters.

 Software Version currently executing

 Public Network IP Address

 Private Local IP Address (Ethernet subnet and wMMI address)

 WLAN Local IP Address (WLAN subnet)

 Access Point Name (APN) for the satellite connection

 Modem International Mobile Equipment Identity (IMEI)

 SIM International Mobile Subscriber Identity ( IMSI)

 Ethernet and WLAN Media Access Control (MAC) Addresses

STATISTICS SCREEN

The Statistics Screen provides you with an estimate of your data usage. Data usage

figures are obtained by counting the bytes in the IP packets received by and sent from

the Thuraya IP+

terminal. You can view both “since power on” (per session) and

“Cumulative” (lifetime) data usage counts. To reset the data counters of a session,

simply select the reset button for either transmit or receive and click the Apply

button.

Note: The data usage figures provided on the screen are estimates only.

This feature is not tied into the actual billing system. Hughes assumes no

liability if differences are found between data usage figures and your actual

bill.