User's Manual

Thuraya IP+ Satellite Modem User Guide 9
3500799-0001 rev A
 Press the Modify button. You are then brought to the first value in the series
of QoS settings.
Change Rate Menu Comment
Standard Selects Background QoS for both the transmit and
receive directions
Tx: 384Kbps Selects 384Kbps Tx Streaming QoS
Tx: 16Kbps Selects 16Kbps Tx Streaming QoS
Tx: 32Kbps Selects 32Kbps Tx Streaming QoS
Tx: 64Kbps Selects 64Kbps Tx Streaming QoS
Tx: 128Kbps Selects 128Kbps Tx Streaming QoS
Tx: 256Kbps Selects 256Kbps Tx Streaming QoS
Rx: 384Kbps Selects 384Kbps Rx Streaming QoS
Rx: 16Kbps Selects 16Kbps Rx Streaming QoS
Rx: 32Kbps Selects 32Kbps Rx Streaming QoS
Rx: 64Kbps Selects 64Kbps Rx Streaming QoS
Rx: 128Kbps Selects 128Kbps Rx Streaming QoS
Rx: 256Kbps Selects 256Kbps Rx Streaming QoS
 Press the Modify button to scroll down the Standard and Tx QoS values until
you see the setting you want. When you scroll to each setting, the displayed
QoS value blinks, indicating that this selection is pending. Press the Modify
button to move to the next setting without changing the pre-existing value.
 When the list of values is exhausted, press the Modify button to lead you
back to the first value. You can cancel the selection and transition back to the
status display via a short press of the Power button.
 When you have found the value you want, press the Menu button. This action
selects the new rate. Once you select the rate, you are transitioned to the Rx
set of values unless you selected “Standard” in which case you will exit rate
selection.
 Navigation through and selection of the Rx values is the same as for the Tx
values. Use the Modify button to scroll through the list in a circular manner,
with cancellation achieved via the short press of the Power button. Pressing
the Menu button selects and stores the new Rx rate, and you will then exit
rate selection.